Ridgid
Ridgid 18V R86114 Drill/Driver
Sitting above the SubCompact R87012, this is the strongest drill/driver in Ridgid's 18V lineup without a hammer mode: a brushless motor rated at 800 in-lbs and a two-speed gearbox topping out at 2,100 RPM. It carries an all-metal 1/2-inch ratcheting chuck, a metal gear case, a 24-position clutch, a foot LED and an auxiliary side handle. Registration within 90 days adds Ridgid's Lifetime Service Agreement, which covers parts, service and batteries. Anyone who wants more torque has to step up to the R861152 hammer drill, since Ridgid sells no high-torque drill without the hammer.
Specifications
Features
Written from the maker's spec sheet and independent reviews, not from owner reports.
Strengths
- ✓$129 bare from Ridgid's own store, well under the other flagships in this group.
- ✓Lifetime Service Agreement covers the tool and registered batteries for free parts and service, which no other brand here offers.
- ✓All-metal ratcheting chuck and metal gear case where many sub-$150 drills use plastic.
- ✓3.1 lbs bare keeps it lighter than the Bosch and Metabo HPT drills in this group.
- ✓Comes with an auxiliary side handle, which helps when a hole saw grabs.
- ✓Runs on every Ridgid 18V battery, including the MAX Output packs Ridgid pairs it with for full output.
Drawbacks
- ✗800 in-lbs is the lowest in-lb rating in this group, and a big step below the 1,250 in-lb R861152 hammer drill.
- ✗Sold only at Home Depot, so you get no price competition and stock depends on one chain.
- ✗Service-agreement claims go through authorized service centers and need registration within 90 days.
- ✗The foot-mounted LED sits low, so the chuck can shadow the bit tip.
- ✗Ridgid publishes no head length, so check the fit yourself before buying for tight framing bays.
Common Questions
What does Ridgid's Lifetime Service Agreement cover on the R86114?
Should I buy the R86114 or step up to the R861152 hammer drill?
Is 800 in-lbs enough for hole saws and spade bits?
Which Ridgid batteries get the most out of the R86114?
Compare the Ridgid 18V R86114 Drill/Driver
Related tools
More from Ridgid →
Ryobi launched this second-generation HP brushless drill/driver in March 2025 as a Home Depot exclusive, and it replaced the 750 in-lbs PBLDD01 as the most powerful drill/driver in the ONE+ range. It makes 850 in-lbs through a 2-speed gearbox (0-700 and 0-2,150 RPM), with a 24-position clutch and a 1/2-inch ratcheting metal chuck. At 2.3 lbs bare it is the lightest drill/driver here, 0.8 lb under the Ridgid R86114. Ryobi's '65% more torque' claim is measured against its basic brushed PCL206, not against the previous HP model.
Flex's top drill/driver makes 1,400 in-lbs from its Sensor-Free brushless motor, and a Turbo switch raises the two gear ranges from 0-550/0-2,000 to 0-700/0-2,500 RPM for fast small-bit work. The metal single-sleeve ratcheting chuck has carbide teeth, and anti-kickback protection and electronic braking are built in. At 7 inches long and 3.7 lbs bare, it packs that torque into a body shorter than Bosch's. The tool-only FX1171T-Z comes with a side handle, bit holder and belt clip.
Part of Craftsman's October 2024 V20 BRUSHLESS RP expansion, the CMCD725 is the non-hammer twin of the CMCD726 hammer drill. It shares that drill's 495 UWO rating and 0-500/0-2,000 RPM two-speed gearbox, and Craftsman claims 60% more power and 34% faster drilling than the brushed CMCD700. Craftsman rates it in UWO, not in-lbs, so its torque can't be compared directly with the others here. In the US it is sold only as the CMCD725D2 kit with two 2.0Ah batteries, a charger and a bag, which went for $99 at Lowe's.
Launched in May 2025 to replace the DCD800, the DCD801 is DeWalt's highest-output 2-speed drill/driver, rated at 1,050 max watts out (MWO). DeWalt no longer quotes in-lbs for it. A gyro-based ANTI-ROTATION system cuts the motor if the body spins suddenly in a bind-up, and a red LED on the tool shows when it has tripped. Gearing is 0-650 and 0-2,000 RPM through a 15-position clutch and metal ratcheting chuck. The head is 6.47 in long, about half an inch shorter than the DCD806 hammer drill version.
Makita launched the XFD14 in May 2021 as the non-hammer twin of its XPH14 flagship, and it remains the most powerful driver-drill in the 18V LXT range. Its brushless motor makes 1,250 in-lbs through a 2-speed gearbox (0-550 and 0-2,100 RPM), with a 21-step clutch and an all-metal self-ratcheting chuck. Makita rates it for 3-inch self-feed bits and 6-inch hole saws in wood, and the 7-inch head is 14% shorter than the model it replaced. XPT sealing and STAR Protection overload controls come standard, but there is no anti-kickback electronics.
With a CORE18V PROFACTOR pack fitted, Bosch rates its heaviest-hitting non-hammer drill at 1,330 in-lbs from the BITURBO brushless motor, through a 0-550/0-2,200 RPM two-speed metal gearbox. KickBack Control cuts power when the bit binds, and Electronic Angle Detection gives feedback on a small onboard interface so long screws and holes go in at the angle you set. A 25-position clutch, all-metal chuck and a connectivity-ready slot for Bosch's GCY42 module round it out. It launched in January 2022 alongside the GSB18V-1330C hammer version, which is the one to buy if you ever drill masonry.