Cordless Impact Wrenches by Platform

Makita's 18V LXT mid-torque puts 520 ft-lbs of fastening and 740 ft-lbs of nut-busting torque into a 6-11/16-inch body that weighs 6.0 lbs with a battery. Four speeds sit alongside three forward and three reverse Auto-Stop modes, the most granular control in this class, plus a full-speed mode that cuts the trigger travel. XPT sealing and a flexible joint that isolates the battery from grip vibration are aimed at daily professional use; the XWT18 is the detent-pin twin.

Milwaukee's Gen 2 mid-torque packs 650 ft-lbs of nut-busting torque into a 6-inch head and 3.5 lbs bare, which is why it lives on so many shop carts. Four-mode Drive Control gives three speeds plus Mode 4, which quits at about 35 ft-lbs when snugging and backs off RPM once a bolt breaks free in reverse. Three LEDs ring the anvil, and the friction-ring 2962 has pin-detent (2962P) and 3/8-inch (2960) siblings built on the same body.

Ryobi's HP brushless mid-torque doubles the old brushed P261 with 450 ft-lbs of fastening and 600 ft-lbs of breakaway torque, and its 2,800 RPM top speed ties Ridgid's R86012 for the fastest here. Three speeds plus Auto mode handle the finesse: Auto stops after a few impacts in forward so you can finish with a torque wrench, and in reverse it ramps up to break a fastener loose, then quits. A friction-ring anvil, three LEDs around the nose and a die-cast gear case round it out; the high-torque PBLIW01 is a separate, much larger tool.

Replacing the DCF894, DeWalt's current mid-range 1/2-inch wrench is rated at 600 ft-lbs fastening and 800 ft-lbs breakaway, the biggest paper numbers in the 18V-class mid-torque field. A push-button selector gives three impacting speeds plus Precision Wrench, which pauses briefly once impacting starts in forward and slows down in reverse so a loose nut doesn't fly off. The DCF891 uses a hog-ring anvil; the DCF892 is the same tool with a detent pin.

Of the impact wrenches here, Craftsman's Brushless RP 1/2-inch is the lightest-duty: 275 ft-lbs of max fastening torque, a 1,900 RPM top speed and two mode settings. A hog ring anvil makes socket swaps quick, and an LED work light and variable-speed trigger help in tight wheel wells. Craftsman doesn't publish a breakaway or impact-rate figure, so it's hard to compare directly against rivals that do. At around $149 bare it's the cheapest impact wrench in the catalog.

Flex rates this 6.3-inch wrench at 600 ft-lbs fastening and 750 ft-lbs nut-busting, tied with DeWalt's DCF891 for the highest fastening rating here, and it backed them up with a consistent 414.8 ft-lbs working torque on Pro Tool Reviews' test rig. Three speeds run from 450 to 2,700 RPM. Bolt Auto Stop prevents over-tightening lug nuts, and Bolt Removal mode shuts off once a nut breaks free. A vibration-isolating housing and an electric brake round it out. The anvil is friction ring only.

Ridgid claims 500 ft-lbs fastening and 650 ft-lbs breakaway for its current 1/2-inch mid-torque, which is 10% more compact than the R86011 it replaced. Three speeds cover most jobs, and a fourth auto mode stops once a bolt seats in forward, then runs full breakaway in reverse and stops when the bolt comes loose. The die-cast gearbox and friction-ring anvil are what you'd expect in this class. Register within 90 days and Ridgid's Lifetime Service Agreement covers parts, service and batteries.

Rated at 568 ft-lbs tightening and 774 ft-lbs nut-busting, Metabo HPT's 36V mid-torque wrench has a 4-stage speed switch running 1,500 to 2,400 RPM. An auto stop mode prevents snapping bolts from over-tightening, and it can be combined with the High/Low selector. The main unit is rated IP56 against dust and water, and a vibration damper sits between the handle and the battery mount. It runs on any MultiVolt 36V/18V pack or on Metabo's AC adapter.

This 1/2-inch Bosch mid-torque trades headline numbers for control: 330 ft-lbs fastening and 590 ft-lbs breakaway from a 6.6-inch, 3.5 lb body. Three speed/torque settings sit alongside two assist modes, one that stops when the fastener seats and one that stops spinning once a nut breaks loose in reverse so it doesn't drop into the wheel well. The anvil has both a friction ring and a thru-hole, so you can run quick-change sockets or pin them for overhead work. It's connected-ready, but the module that unlocks custom presets in the Bosch app is sold separately.

At 810 ft-lbs nut-busting, the highest breakaway rating of any mid-torque here, plus 560 ft-lbs fastening, Makita's 40V XGT wrench comes in the same 6-11/16-inch length as the LXT version. It keeps the four speeds, three forward and three reverse Auto-Stop modes and full-speed mode, and adds XGT's tool-to-battery communication for overload and overheat protection. Weight is 6.0 lbs with a compact 2.5Ah pack; the GWT08 is the detent-anvil version.